Profiles RHF LLC - UAE

Back to Index
PROFILES RHF LLC
P O Box 656 - Sharjah - United Arab Emirates
Tel: +971 6 5342222 - Fax: +971 6 5342000
E-Mail      : richard@profilesrhf.com
Web Site  :http://www.profilesrhf.com

ACCESSORIES

GRP TRANSLUSCENT SHEETS
Our GRP Transluscent Sheets are Contact Moulded to any profile using clear UV stabilised
Polyester resins reinforced with Powder Bonded 'E' Grade fibreglass Mats. The raw
materials used are from reputed manufacturers. Particular care is taken to see that there
are no air pockets in the laminate and the surface which is not in contact with the Mould is
top coated to provide closed surface which increases thelife of Transluscent Sheet. We use
GRP Moulds for manufacturing our Transluscent Sheets.


STAINLESS STEEL SELF TAPPING SCREWS
Application: Fixing of Sandwich Panels
Fixing of Single Skin Sections
TYPE 'A': Thread of 2,54 - Pointed end
On wood purlins
On steel purlins less than
3 mm thickness
Screw with dia 19mm washer
6,5 x 25mm
6,5 x 70mm
6,5 x 130mm

TYPE 'B': Thread of 1,81 - Flat end
On steel purlins exceeding
3mm thickness
Screw with dia 19mm washer
6,3 x 20mm
6,3 x 80mm
6,3 x 110mm

POP BLIND RIVETS
Sealed Type - 99.5% pure Aluminium
material composition to BS1475 A199.5
Mandrel:Aluminium (A)
PD 68A 48 x 11.4mm

Tensile 1060N
Stength (240 lbf)

Shear 1060N
Strength (240 lbf)

PURLIN TAPE:
Construction
Polyester/cotton cloth laminated to a polyethylene backing with a high tack, natural rubber adhesive.
Colors
Silver or Black

BUTYL STRIP
Roofing & Cladding - gutter joints, side and end laps (special 'U' shape strip available for double
seal on end laps), joining single skin rooflights.
Composition: Blend of cross-linked Butyl and inert filters extruded into strip or bead to
form a roll, with paper backing.
Application: By hand direct from roll. Apply firmly to one joint surface, remove backing
paper, press other surface firmly into strip face.
Size: Thickness 2.5mm
Length 19mm
Width 9mm

SCREW CAP:
Coloured plastic caps to fit hexagonal head of screw & cover washer.

FILLER BLOCK:
Sealing all roofing/cladding profiles against water/water vapours ingress. Roof light fillers.
Eaves and ridge fillers.

SHEAR RESISTANCE: 592 daN
TEAR RESISTANCE: 724 daN

Back to Index